Flexible brake pipe from linked master cylinder to proporting valve or rear manifold

Original type rubber brake line with chunky ends

 This part is available by special order, request a quote

18658560

Brembo pad spring kit for Brembo P4 30/34F calipers with two pad pins

Brembo ref. 04501220

 This part is available by special order, request a quote

 01659131 GU01659131 01 65 91 31
 0165 9131 0165.9131 01.65.91.31

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Polished replica adjustable aluminium brake lever for PS 16 and PS 22 handlebar master cylinders. Can also be fitted as an adjustable update to Breva 750, Nevada 750 (2004 on) , V7 Classic , V7 Cafe etc... Note that this lever blade is approximately 20mm shorter than the OE lever.

Also known as Guzzi ref. 981050 and 854603. BRA03645 can be used as a non adjustable substitute

 1 in stock

AP8133510

Also fits Aprilia Caponord, Aprilia Pegaso 650 (CHASSIS NUMBER PREFIX: ZD4VD0,ZD4VDA,ZD4VDB,ZD4VDD,ZD4VDE 2005-2009), Aprilia Futura 1000 (2001-2003)

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Front right hand brake pipe linking yoke mounted splitter to handlebar master cylinder

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

14657500-z 14657500 GU14657500 14 65 75 00
 1465 7500 1465.7500 14.65.75.00

Polished aluminium handlebar brake lever for Brembo master cylinder

Supercedes Guzzi ref. 856048

 This part is available by special order, request a quote

 896346 MG896346

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Brake pipe used for supplying front left hand caliper, screws directly into caliper

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

17658860-z 17658860 GU17658860 17 65 88 60
 1765 8860 1765.8860 17.65.88.60

Brake lever bracket and adjuster assembly incl. threaded hole for mirror for models with a cable operated hydraulic front brake

 Sorry, this part is no longer available.

19605400-666